Central module PG6UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 200 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
CENTRAL MODULE PG12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 230 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module M12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH (12 LPH)
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 1
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 180 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module S18UV
With 2-stage reverse osmosis and SEPAMED pump
Key Features:
Rated capacity: 4.8 GPH (18 LPH)
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Voltage: 230 VDC
Output pressure: 500...1200 psi ( 35...82 bar )
  • The lowest noise-level operation, the device is acceptable to be mounted near living areas
  • Two-stage reverse osmosis, the deepest purification level is achieved
Power consumption: 600 W
  • Service interval increased up to 2-3 years
  • Regular hydraulic testing of high pressure line
Housing and inner mechanical parts material: high quality aluminum
  • Operation enabled whether with active or passive nozzles
  • Continuous extensive UV sterilization in the vessel
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Pressure setting in the range of 500...1200 psi
  • Touch control panel
Advantages:
  • Microbiological safety - the system totally removes viruses, bacteria and fungus
  • Completely automatic operation
  • Leakage control inside the case and on high pressure line
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Control panel HS2W
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
  • Sensor display of high resolution
  • Electronic scheme maintains required relative humidity with high accuracy
Supply voltage: 20...24 VDC
Color of face plate: white (HS2W)
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS2B
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
Supply voltage: 20...24 VDC
  • Sensor display of high resolution
Color of face plate: black (HS2B)
  • Electronic scheme maintains required relative humidity with high accuracy
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS1
Modern look
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...95%
Housing material: high-quality matted plastic
Accuracy of RH regulation: ± 3% ( 20...90% range )
Supply voltage: 20...24 VDC
  • Electronic circuit maintains the required relative humidity with high accuracy
Color of face plate: white, RAL 9010
  • LCD display for control of the set and current relative humidity
  • On-wall installation
  • Modern look
Dimensions WxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Advantages:
Maximum humidistat MHS1
Modern look
Key Features:
Protection threshold setting: 25...95%, preinstalled on 60%
Protection threshold accuracy: ± 5%
Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Housing material: high-quality matted plastic
Color: white, RAL 9010
  • Mechanical design, requiring no power
  • On-wall installation
  • Modern look
Advantages:
Main zone control unit Boson
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Main zone control unit Boson BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: white
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Control unit Boson-C
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: white
  • Fast wall mounting
Control unit Boson-C bl
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: black
  • Fast wall mounting
One-zone wireless controller Boson Receiver
Modern look
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Dimensions (without cable glands) WxDxH, in (mm): 4.5 x 2.2 x 3.5 ( 115 x 55 x 90 )
Line-of-sight wireless range: up to 3000 ft
Power supply: 230 VAC
  • Wide signal range, including operation through reinforced concrete walls
  • Easy pairing with wireless control units
Advantages:
External micro-carbon filter MCF75
For PG6UV
Key Features:
Chlorine capacity: 20,000 gal ( 75,000 l )
Micro-carbon filter class: 5 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 12 x 4.5 ( 300 x 115 )
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
Softener module SM1
For middle hardness water
Key Features:
Maximum clean water capacity: 9.6 GPH ( 36 LPH )
Salt capacity: 55 lb ( 25 kg )
Power consumption: 6 W
Inlet pressure: 30...90 psi ( 2...6 bar )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Inner tank material: fiberglass
  • Automatic regeneration (requires periodic salt refilling)
Housing material: high-quality plastic
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Connection: G 1/2" ( 1/2" BSPP )
  • Operation ready connector for output to PG12UV
Advantages:
  • Equipped with an electronic control module
  • Fully automatic operation
  • Cabinet construction - no extra salt tank
  • For water hardness over 250 ppm
Filter installation set FS1
Required for SM1, optional instead of MCF170
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings height x diameter, in (mm): 12 x 4.5 ( 300 х 115 )
  • Microfiltration function
  • Very high capacity for chlorine
Dimensions of micro-carbon filter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
  • Easy replacement of filter elements
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Advantages:
  • Pressure gauge allows to monitor filters' condition
External micro-carbon filter MCF170
Necessary if NOT using FS1
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
Additional microfilter MF2
Optional in case of high level of water contaminants
Key Features:
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet JG 3/8", outlet JG 3/8"
  • Microfiltration function
  • Easy replacement of filter element
  • Removes suspended particles
Advantages:
Deep purification module DPM6 NEW
Optional for PG6UV
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,300 gal ( 12,500 l )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 22 x 7 x 18 ( 570 x 170 x 460 )
Deep purification module DPM12 NEW
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 12,500 l )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 24 x 9 x 22 ( 620 x 220 x 550 )
Ultradeep purification module DPM Blue
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 0.1 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,700 gal ( 14,000 l )
  • Highest degree of purification - up to 0.1 μS/cm
  • Silent operation, the device is suitable for mounting near living areas
  • Built-in purity water analyzer, inlet and outlet
  • Removing air bubbles
Housing material: high quality aluminum
  • Visual monitoring of ion exchange resin
Dimensions WxDxH, in (mm): 6 x 17 x 29 ( 405 x 425 x 740 )
  • Completely automatic operation
Voltage: 18 VAC
Advantages:
  • Leakage control
  • Easy CO2 cylinder replacement
  • High ion exchange resin and CO2 cylinder capacity
Passive nozzle PN1SS
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN1.2SS
Capacity is 0.6 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN3SS
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
  • Chemically inert and low adhesion inner layer does not accumulate biofilms
Minimum bending radius: 1.6 in ( 40 mm )
  • Flexible and very elastic design simplifies installation, high resistance to mechanical damage
Key Features:
  • Large safety margin for maximum pressure
Maximum operating pressure: 4000 psi ( 275 bar )
Burst pressure: 13800 psi ( 950 bar )
  • Small outer diameter for easy installation
Conditional pass diameter: 5/32 in ( 4 mm )
Outer diameter: 9/32 in ( 7.2 mm )
Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
Advantages:
Inner layer: PTFE
Outer reinforcing layer: high quality stainless steel
Multi-zone controller MZC10RF
Modern look
Key Features:
Number of separately controlled humidification zones: 10
Number of receiving board slots: 10
Voltage: 20...24 VDC
Supply voltage for the valves and control panels: 20...24 VDC
Power consumption (including connected nozzles), max.: 110 W
  • Operates with both wired control panels and wireless control units in any combination
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 14 x 6 x 7.8 ( 360 x 150 x 200 )
  • Provides power for wired control panels and nozzles
Color: light gray, transparent cover
Advantages:
  • Provides nozzles' operating modes according to M12UV's mode
  • Allows cascading to increase the number of humidification zones
  • Allows to set the priority of the nozzles
  • Provides a link to BMS (alarm output)
  • Waterproof design
Receiving board RF Receiver
Optional for MZC10RF
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Power supply (from MZC10RF's motherboard): 20...24 VDC
  • Wide signal range, including operation through reinforced concrete walls
  • Quick installation on MZC10RF's motherboard
  • Easy pairing with wireless control units
Advantages:
Housing material: special fiberglass
Dimensions WxH, in (mm): 1 x 2.8 ( 26 x 72 )
Active nozzle AN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle SAN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
Material: body - stainless steel, fogging insert - ruby
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
Material: body - stainless steel, fogging insert - ruby
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 20...24 VDC
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Intermediate tube's length: 26 in
External ultra-carbon filter UCF700
Required for S18UV
Key Features:
Chlorine capacity: 700,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Dimensions without bracket and fittings HxD, in (mm): 27 x 8 ( 680 x 200 )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
  • Quick change of the filter element
Advantages:
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
External ultra-carbon filter UCF900
Required for S18UV
Key Features:
Chlorine capacity: 900,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
Advantages:
ENG
FR
Introduction
Our products
System
Pricelist
Company
Contacts
About company
Main
About Buhler-AHS
Buhler-AHS, a renowned engineering company specializing in the manufacturing of agricultural equipment, was established in 2007.
In order to expand their range of activities, the company created a new brand focused on providing comfort solutions. This led to the development and manufacture of a diverse range of adiabatic air humidification systems for residential and commercial areas.
Maintaining full control over the manufacturing process, Buhler-AHS operates its own assembly plants. This guarantees that all products meet the specified requirements and enables strict quality control during the final system assembly.
Every component of the manufactured systems undergoes thorough testing and certification to ensure compliance with safety, ecological compatibility, and quality standards.
The company boasts a team of highly qualified specialists who are constantly expanding their expertise. They have developed convenient and reliable schemes for the connection and commissioning of new humidification systems. Additionally, Buhler-AHS conducts continuous training programs for specialists from their partner companies.
The company boasts a team of highly qualified specialists who are constantly expanding their expertise. They have developed convenient and reliable schemes for the connection and commissioning of new humidification systems. Additionally, Buhler-AHS conducts continuous training programs for specialists from their partner companies.
Buhler-AHS places great emphasis on creating humidification systems that are easy to install and maintain. They have devised an original scheme for concealed spray-nozzle installation, eliminating any damage to the interior of premises. This approach ensures maximum efficiency at the lowest cost. Furthermore, the integrated high-performance pre-purification system guarantees reliable operation even in areas with unpurified hard water supply. To prevent leakages, all systems are equipped with a reliable protective mechanism.
With extensive experience in creating intricate mechanical and hydraulic devices using various materials, Buhler-AHS ensures the high quality of their products. Through continuous work and testing, the company strives to enhance the reliability of individual system units and discover innovative methods to improve capacity and product quality.
At Buhler-AHS, delivering excellent products and customer satisfaction is the driving force behind their continuous development of innovative humidification systems. They are committed to providing easy installation and maintenance, ensuring comfort and convenience for their customers.
In 2023, a new production line was launched in European Union. Due to the increased demand for humidification systems in Northern Europe, the production of equipment under the Buhler-AHS brand was moved separately to EU. Production is carried out under the supervision of highly qualified engineers from Canada and Europe.