Central module PG6UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
- Very low power consumption
- Silent operation, the device is suitable for mounting near living areas
Power consumption: 200 W
- Internal hydraulic valves - no source of noise in the room
- Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
- High degree of demineralization - 97...99%
- Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
- Leakage control inside the case and on high pressure line
- Automatic antiscale function
Advantages:
- Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
CENTRAL MODULE PG12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
- Very low power consumption
- Silent operation, the device is suitable for mounting near living areas
Power consumption: 230 W
- Internal hydraulic valves - no source of noise in the room
- Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
- High degree of demineralization - 97...99%
- Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
- Leakage control inside the case and on high pressure line
- Automatic antiscale function
Advantages:
- Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module M12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH (12 LPH)
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 1
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
- Very low power consumption
- Silent operation, the device is suitable for mounting near living areas
Power consumption: 180 W
- Internal hydraulic valves - no source of noise in the room
- Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
- High degree of demineralization - 97...99%
- Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
- Leakage control inside the case and on high pressure line
- Automatic antiscale function
Advantages:
- Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module S18UV
With 2-stage reverse osmosis and SEPAMED pump
Key Features:
Rated capacity: 4.8 GPH (18 LPH)
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Voltage: 230 VDC
Output pressure: 500...1200 psi ( 35...82 bar )
- The lowest noise-level operation, the device is acceptable to be mounted near living areas
- Two-stage reverse osmosis, the deepest purification level is achieved
Power consumption: 600 W
- Service interval increased up to 2-3 years
- Regular hydraulic testing of high pressure line
Housing and inner mechanical parts material: high quality aluminum
- Operation enabled whether with active or passive nozzles
- Continuous extensive UV sterilization in the vessel
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
- Pressure setting in the range of 500...1200 psi
- Touch control panel
Advantages:
- Microbiological safety - the system totally removes viruses, bacteria and fungus
- Completely automatic operation
- Leakage control inside the case and on high pressure line
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Control panel HS2W
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
- Sensor display of high resolution
- Electronic scheme maintains required relative humidity with high accuracy
Supply voltage: 20...24 VDC
Color of face plate: white (HS2W)
- Modern design, possible color selection
- Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS2B
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
Supply voltage: 20...24 VDC
- Sensor display of high resolution
Color of face plate: black (HS2B)
- Electronic scheme maintains required relative humidity with high accuracy
- Modern design, possible color selection
- Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS1
Modern look
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...95%
Housing material: high-quality matted plastic
Accuracy of RH regulation: ± 3% ( 20...90% range )
Supply voltage: 20...24 VDC
- Electronic circuit maintains the required relative humidity with high accuracy
Color of face plate: white, RAL 9010
- LCD display for control of the set and current relative humidity
- On-wall installation
- Modern look
Dimensions WxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Advantages:
Maximum humidistat MHS1
Modern look
Key Features:
Protection threshold setting: 25...95%, preinstalled on 60%
Protection threshold accuracy: ± 5%
Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Housing material: high-quality matted plastic
Color: white, RAL 9010
- Mechanical design, requiring no power
- On-wall installation
- Modern look
Advantages:
Main zone control unit Boson
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
- High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
- High measurement accuracy
- Accumulator life up to half-year without recharge
- Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
- Fast wall mounting
Main zone control unit Boson BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
- High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
- High measurement accuracy
- Accumulator life up to half-year without recharge
- Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
- Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
- Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
- High measurement accuracy
- Battery life up to half-year without recharge
- Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
- Fast wall mounting
Color: white
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
- Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
- High measurement accuracy
- Battery life up to half-year without recharge
- Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
- Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Control unit Boson-C
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
- High measurement accuracy
- Battery life up to half-year without recharge
- Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: white
- Fast wall mounting
Control unit Boson-C bl
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
- High measurement accuracy
- Battery life up to half-year without recharge
- Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: black
- Fast wall mounting
One-zone wireless controller Boson Receiver
Modern look
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Dimensions (without cable glands) WxDxH, in (mm): 4.5 x 2.2 x 3.5 ( 115 x 55 x 90 )
Line-of-sight wireless range: up to 3000 ft
Power supply: 230 VAC
- Wide signal range, including operation through reinforced concrete walls
- Easy pairing with wireless control units
Advantages:
External micro-carbon filter MCF75
For PG6UV
Key Features:
Chlorine capacity: 20,000 gal ( 75,000 l )
Micro-carbon filter class: 5 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 12 x 4.5 ( 300 x 115 )
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8
- Microfiltration function
- Very high capacity for chlorine
- Easy replacement of filter element
Advantages:
Softener module SM1
For middle hardness water
Key Features:
Maximum clean water capacity: 9.6 GPH ( 36 LPH )
Salt capacity: 55 lb ( 25 kg )
Power consumption: 6 W
Inlet pressure: 30...90 psi ( 2...6 bar )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Inner tank material: fiberglass
- Automatic regeneration (requires periodic salt refilling)
Housing material: high-quality plastic
- Very low power consumption
- Silent operation, the device is suitable for mounting near living areas
Connection: G 1/2" ( 1/2" BSPP )
- Operation ready connector for output to PG12UV
Advantages:
- Equipped with an electronic control module
- Fully automatic operation
- Cabinet construction - no extra salt tank
- For water hardness over 250 ppm
Filter installation set FS1
Required for SM1, optional instead of MCF170
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings height x diameter, in (mm): 12 x 4.5 ( 300 х 115 )
- Microfiltration function
- Very high capacity for chlorine
Dimensions of micro-carbon filter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
- Easy replacement of filter elements
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Advantages:
- Pressure gauge allows to monitor filters' condition
External micro-carbon filter MCF170
Necessary if NOT using FS1
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
- Microfiltration function
- Very high capacity for chlorine
- Easy replacement of filter element
Advantages:
Additional microfilter MF2
Optional in case of high level of water contaminants
Key Features:
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet JG 3/8", outlet JG 3/8"
- Microfiltration function
- Easy replacement of filter element
- Removes suspended particles
Advantages:
Deep purification module DPM6 NEW
Optional for PG6UV
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,300 gal ( 12,500 l )
- Silent operation, the device is suitable for mounting near living areas
- Adjustable degree of purification - up to 2 μS/cm
- High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 22 x 7 x 18 ( 570 x 170 x 460 )
Deep purification module DPM12 NEW
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 12,500 l )
- Silent operation, the device is suitable for mounting near living areas
- Adjustable degree of purification - up to 2 μS/cm
- High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 24 x 9 x 22 ( 620 x 220 x 550 )
Ultradeep purification module DPM Blue
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 0.1 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,700 gal ( 14,000 l )
- Highest degree of purification - up to 0.1 μS/cm
- Silent operation, the device is suitable for mounting near living areas
- Built-in purity water analyzer, inlet and outlet
- Removing air bubbles
Housing material: high quality aluminum
- Visual monitoring of ion exchange resin
Dimensions WxDxH, in (mm): 6 x 17 x 29 ( 405 x 425 x 740 )
- Completely automatic operation
Voltage: 18 VAC
Advantages:
- Leakage control
- Easy CO2 cylinder replacement
- High ion exchange resin and CO2 cylinder capacity
Passive nozzle PN1SS
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Passive nozzle PN1.2SS
Capacity is 0.6 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Passive nozzle PN3SS
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
- Chemically inert and low adhesion inner layer does not accumulate biofilms
Minimum bending radius: 1.6 in ( 40 mm )
- Flexible and very elastic design simplifies installation, high resistance to mechanical damage
Key Features:
- Large safety margin for maximum pressure
Maximum operating pressure: 4000 psi ( 275 bar )
Burst pressure: 13800 psi ( 950 bar )
- Small outer diameter for easy installation
Conditional pass diameter: 5/32 in ( 4 mm )
Outer diameter: 9/32 in ( 7.2 mm )
Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
Advantages:
Inner layer: PTFE
Outer reinforcing layer: high quality stainless steel
Multi-zone controller MZC10RF
Modern look
Key Features:
Number of separately controlled humidification zones: 10
Number of receiving board slots: 10
Voltage: 20...24 VDC
Supply voltage for the valves and control panels: 20...24 VDC
Power consumption (including connected nozzles), max.: 110 W
- Operates with both wired control panels and wireless control units in any combination
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 14 x 6 x 7.8 ( 360 x 150 x 200 )
- Provides power for wired control panels and nozzles
Color: light gray, transparent cover
Advantages:
- Provides nozzles' operating modes according to M12UV's mode
- Allows cascading to increase the number of humidification zones
- Allows to set the priority of the nozzles
- Provides a link to BMS (alarm output)
- Waterproof design
Receiving board RF Receiver
Optional for MZC10RF
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Power supply (from MZC10RF's motherboard): 20...24 VDC
- Wide signal range, including operation through reinforced concrete walls
- Quick installation on MZC10RF's motherboard
- Easy pairing with wireless control units
Advantages:
Housing material: special fiberglass
Dimensions WxH, in (mm): 1 x 2.8 ( 26 x 72 )
Active nozzle AN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
- Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
- Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle SAN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
- Absolutely silent electromagnetic high-pressure TWINCOIL valve
- Anti-drip valve
- High capacity filter
- Long life thanks to ruby insert
Advantages:
- Less visible installation due to the built-in construction
- Entirely flow-through construction, no stagnant zones
- Fogging head's silent operation
Active nozzle SAN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
- Absolutely silent electromagnetic high-pressure TWINCOIL valve
- Anti-drip valve
- High capacity filter
Material: body - stainless steel, fogging insert - ruby
- Long life thanks to ruby insert
Advantages:
- Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
- Entirely flow-through construction, no stagnant zones
- Fogging head's silent operation
Active nozzle SAN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
- Absolutely silent electromagnetic high-pressure TWINCOIL valve
- Anti-drip valve
- High capacity filter
Material: body - stainless steel, fogging insert - ruby
- Long life thanks to ruby insert
Advantages:
- Less visible installation due to the built-in construction
Control voltage: 20...24 VDC
- Entirely flow-through construction, no stagnant zones
- Fogging head's silent operation
Intermediate tube's length: 26 in
External ultra-carbon filter UCF700
Required for S18UV
Key Features:
Chlorine capacity: 700,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Dimensions without bracket and fittings HxD, in (mm): 27 x 8 ( 680 x 200 )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
- Ultrafiltration barrier traps bacteria and colloids
- Very high capacity for chlorine
- Quick change of the filter element
Advantages:
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
External ultra-carbon filter UCF900
Required for S18UV
Key Features:
Chlorine capacity: 900,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
- Ultrafiltration barrier traps bacteria and colloids
- Very high capacity for chlorine
Advantages:
System
Adiabatic air humidification systems are designed to provide optimal humidity levels without the need for heating the water. This not only maximizes energy efficiency but also minimizes the need for regular maintenance. By utilizing atomizing nozzles with various orifice diameters, such as 85 µm (0.3 GPH), 2x85 µm (0.6 GPH), or 200 µm (0.9 GPH), water is transformed into a fine fog under high pressure. This mist instantly evaporates, ensuring that it doesn't accumulate on surfaces like floors, furniture, or equipment. These advanced systems are suitable for residential and office spaces. Furthermore, each system is equipped with a preliminary water purification and softening module to ensure long-lasting operation of the central module and fogging nozzles, while also promoting the safety and purity of the sprayed water.
The water treatment and pump units are conveniently located in a suitable utility area, making them easily accessible for maintenance. High-pressure tubes and fogging nozzles are discreetly positioned behind walls or ceilings, allowing for an unobtrusive installation. Additionally, these systems offer the ability to independently set the desired humidity level in each room through specially designed regulators.
The water treatment and pump units are conveniently located in a suitable utility area, making them easily accessible for maintenance. High-pressure tubes and fogging nozzles are discreetly positioned behind walls or ceilings, allowing for an unobtrusive installation. Additionally, these systems offer the ability to independently set the desired humidity level in each room through specially designed regulators.
Currently, Buhler-AHS offers three series of adiabatic air humidification systems: Playgreen, Manitoba, and Superior. Each series differs in capacity, measured by the amount of fogged water (GPH), and the number of humidification zones (simultaneously activated groups of nozzles). Choose from the 2-zone Playgreen, the 10-zone Manitoba, or the premium 10-zone Superior based on your specific requirements.
Key technical advantages of the system include:
Amulti stage filtration process that demineralized water by 97-99% (99.5% for Superior 18), akin to distilled water. This is achieved through the softener (optional), mechanical microfilter, carbon filter, and RO filter (2-stage for Superior 18).
Furthermore, an additional deionization module supplies fully purified water with a low conductivity level of 0.1 µS/cm.
The built-in 2-stage UV decontaminator ensures that the water is sterilized, providing peace of mind (continuous extensive UV sterilization for Superior 18)
Depending on the type, each nozzle can effectively cover an area ranging from 100 to 1,500 sq ft.
Basic systems specifications
System characteristics
Playgreen 6 / Playgreen 12
Manitoba 12
Superior 18
Service area
Up to 300 m2 / Up to 600 m2
Up to 600 m2
Up to 900 m2
Maximum number of independent zones
2
10 (20 cascaded)
10 (20 cascaded)
Rated capacity
Up to 1.6 GPH /
Up to 3.2 GPH
Up to 3.2 GPH
Up to 3.2 GPH
Up to 4.8 GPH
Maximum numberof nozzles
6 /12
12(24 with sub-zones)
18(36 with sub-zones)
Power consumption
Less than 200 W / Less than 230 W
Less than 300 W
Less than 600 W
MORE ABOUT OUR SYSTEM
Play green 6 is a standard capacity system with a 2-zone capability and a PG6UV unit, boasting a throughput of 1.6 gallons per hour (6 liters per hour).
This system utilizes the innovative patented technology of double pass through the reverse osmosis membrane for optimal performance.
The central module of the Playgreen 6 has a capacity of 1.6 gallons per hour (6 liters per hour) and includes an internal system of valves, allowing for the efficient maintenance of two independent humidification zones. Compact in size, this system is perfect for two groups of rooms with a combined volume of up to 30,000 cubic feet. The Playgreen 6 with PG6UV comes equipped with a comprehensive 5 + 2 (optional) stage filtration system, which includes continuous 2-stage UV water sterilization. Humidistats are strategically installed within each humidification zone to control the precise operation of the nozzles.
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Playgreen 12, a high capacity system with a 2-zone capability and a PG12UV unit, delivering an impressive throughput of 3.2 gallons per hour (12 liters per hour).
Similar to its predecessor, this system also utilizes the patented double pass technology through the reverse osmosis membrane for enhanced efficiency.
The central module of the Playgreen 12 boasts a capacity of 3.2 gallons per hour (12 liters per hour) and features an internal system of valves that can effectively maintain two independent humidification zones. Furthermore, this system requires the addition of a high pressure unit and optional filter and softener units, each carefully selected to match the quality of the supplied tap water. All water processed by the Playgreen 12 undergoes internal 2-stage UV treatment, ensuring its purity. With its outstanding performance, this system is capable of servicing two groups of rooms with a combined volume of up to 60,000 cubic feet. Humidistats installed within each humidification zone are responsible for precise control of the nozzles' operation.
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Manitoba 12, a high capacity system designed for 10 zones and equipped with an M12UV unit, offering a throughput of 3.2 gallons per hour (12 liters per hour).
This system also utilizes the patented double pass technology through the reverse osmosis membrane, guaranteeing exceptional results.
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
The central module of the Manitoba 12 possesses a capacity of 3.2 gallons per hour (12 liters per hour) and supports up to 10 independent humidification zones (which can be expanded up to 20 zones through cascading). Similar to the Playgreen 12, this system requires the addition of a high pressure unit and optional filter and softener units, selected to match the quality of the tap water supply. All water processed by the Manitoba 12 undergoes internal 2-stage UV treatment to ensure its quality. Capable of servicing a group of rooms with a total volume of up to 60,000 cubic feet, this system is exceptionally effective. Humidistats, along with control nozzles, create a unique relative humidity level specific to each room.
Superior 18, a premium high capacity system boasting S18UV units with a throughput of 4.8 gallons per hour (18 liters per hour)
This system utilizes a 2-stage reverse osmosis process and features the SEPAMED pump for enhanced performance.
The central module's capacity is 4.8 GPH (18 LPH). The module supports up to 10 (20 cascaded) independent humidification zones. In addition to the central module, the ultra-carbon filter and the softener (optional) must be added. Superior 18 system provides the deepest possible water treatment thanks to 2-stage reverse osmosis and continuous extensive sterilization of water by ultraviolet light. Superior 18 system has high performance and may operate with a group of rooms with the total volume up to 90,000 ft3. Humidistats are installed in rooms and control nozzles maintaining in each separate zone its own humidity level.
All equipment within these systems is equipped with a leakage protection system and sensors for malfunction and water shutdown detection. In the event of malfunction or breakdown, all separate components of the system can be easily disconnected for servicing. The compact, self-contained, and automated nature of these modules ensures convenience and ease of use. The frequency of maintenance depends on the quality and quantity of water used but is typically carried out once a year (once every 2-3 years for the Superior 18). Rest assured, all equipment is certified and extensively tested to meet the required technical specifications after assembly.
All equipment within these systems is equipped with a leakage protection system and sensors for malfunction and water shutdown detection. In the event of malfunction or breakdown, all separate components of the system can be easily disconnected for servicing. The compact, self-contained, and automated nature of these modules ensures convenience and ease of use. The frequency of maintenance depends on the quality and quantity of water used but is typically carried out once a year (once every 2-3 years for the Superior 18). Rest assured, all equipment is certified and extensively tested to meet the required technical specifications after assembly.
The equipment is produced in branded aluminum cases with an original design. All rights reserved.