Central module PG6UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
Power consumption: 200 W
Housing and inner mechanical parts material: high quality aluminum
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
CENTRAL MODULE PG12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 230 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module M12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH (12 LPH)
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 1
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
Power consumption: 180 W
Housing and inner mechanical parts material: high quality aluminum
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module S18UV
With 2-stage reverse osmosis and SEPAMED pump
Key Features:
Rated capacity: 4.8 GPH (18 LPH)
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Voltage: 230 VDC
Output pressure: 500...1200 psi ( 35...82 bar )
  • The lowest noise-level operation, the device is acceptable to be mounted near living areas
  • Two-stage reverse osmosis, the deepest purification level is achieved
Power consumption: 600 W
  • Service interval increased up to 2-3 years
  • Regular hydraulic testing of high pressure line
Housing and inner mechanical parts material: high quality aluminum
  • Operation enabled whether with active or passive nozzles
  • Continuous extensive UV sterilization in the vessel
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Pressure setting in the range of 500...1200 psi
  • Touch control panel
Advantages:
  • Microbiological safety - the system totally removes viruses, bacteria and fungus
  • Completely automatic operation
  • Leakage control inside the case and on high pressure line
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Control panel HS2W
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
  • Sensor display of high resolution
  • Electronic scheme maintains required relative humidity with high accuracy
Supply voltage: 20...24 VDC
Color of face plate: white (HS2W)
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
  • Sensor display of high resolution
  • Electronic scheme maintains required relative humidity with high accuracy
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Advantages:
Control panel HS2B
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
Supply voltage: 20...24 VDC
Color of face plate: black (HS2B)
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
  • Electronic circuit maintains the required relative humidity with high accuracy
  • LCD display for control of the set and current relative humidity
  • On-wall installation
  • Modern look
Advantages:
Control panel HS1
Modern look
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...95%
Housing material: high-quality matted plastic
Accuracy of RH regulation: ± 3% ( 20...90% range )
Supply voltage: 20...24 VDC
Color of face plate: white, RAL 9010
Dimensions WxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
  • Mechanical design, requiring no power
  • On-wall installation
  • Modern look
Advantages:
Maximum humidistat MHS1
Modern look
Key Features:
Protection threshold setting: 25...95%, preinstalled on 60%
Protection threshold accuracy: ± 5%
Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Housing material: high-quality matted plastic
Color: white, RAL 9010
  • High RF signal range, including operation through reinforced concrete walls
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
Main zone control unit Boson
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Charger connector type: micro-USB
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • High RF signal range, including operation through reinforced concrete walls
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
Main zone control unit Boson BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Charger connector type: micro-USB
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Color: black
Weight: 0.3 lb (130 g)
  • Wide signal range, including operation through reinforced concrete walls
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
Additional zone control unit Shadow
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Charger connector type: micro-USB
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Color: white
Weight: 0.3 lb (130 g)
  • Wide signal range, including operation through reinforced concrete walls
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
Additional zone control unit Shadow BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Charger connector type: micro-USB
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Color: black
Weight: 0.3 lb (130 g)
Control unit Boson-C
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Color: white
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
Control unit Boson-C bl
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Color: black
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Advantages:
  • Fast wall mounting
  • Wide signal range, including operation through reinforced concrete walls
  • Easy pairing with wireless control units
Advantages:
One-zone wireless controller Boson Receiver
Modern look
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Dimensions (without cable glands) WxDxH, in (mm): 4.5 x 2.2 x 3.5 ( 115 x 55 x 90 )
Line-of-sight wireless range: up to 3000 ft
Power supply: 230 VAC
Key Features:
Chlorine capacity: 20,000 gal ( 75,000 l )
Micro-carbon filter class: 5 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 12 x 4.5 ( 300 x 115 )
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
External micro-carbon filter MCF75
For PG6UV
  • Automatic regeneration (requires periodic salt refilling)
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Operation ready connector for output to PG12UV
Advantages:
  • Equipped with an electronic control module
  • Fully automatic operation
  • Cabinet construction - no extra salt tank
  • For water hardness over 250 ppm
Softener module SM1
For middle hardness water
Key Features:
Maximum clean water capacity: 9.6 GPH ( 36 LPH )
Salt capacity: 55 lb ( 25 kg )
Power consumption: 6 W
Inlet pressure: 30...90 psi ( 2...6 bar )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Inner tank material: fiberglass
Housing material: high-quality plastic
Connection: G 1/2" ( 1/2" BSPP )
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter elements
Advantages:
  • Pressure gauge allows to monitor filters' condition
Filter installation set FS1
Required for SM1, optional instead of MCF170
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings height x diameter, in (mm): 12 x 4.5 ( 300 х 115 )
Dimensions of micro-carbon filter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
External micro-carbon filter MCF170
Necessary if NOT using FS1
Key Features:
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet JG 3/8", outlet JG 3/8"
  • Microfiltration function
  • Easy replacement of filter element
  • Removes suspended particles
Advantages:
Additional microfilter MF2
Optional in case of high level of water contaminants
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,300 gal ( 12,500 l )
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 22 x 7 x 18 ( 570 x 170 x 460 )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Deep purification module DPM6 NEW
Optional for PG6UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 12,500 l )
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 24 x 9 x 22 ( 620 x 220 x 550 )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Deep purification module DPM12 NEW
Optional for PG12UV
  • Highest degree of purification - up to 0.1 μS/cm
  • Silent operation, the device is suitable for mounting near living areas
  • Built-in purity water analyzer, inlet and outlet
  • Removing air bubbles
  • Visual monitoring of ion exchange resin
  • Completely automatic operation
Advantages:
  • Leakage control
  • Easy CO2 cylinder replacement
  • High ion exchange resin and CO2 cylinder capacity
Ultradeep purification module DPM Blue
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 0.1 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,700 gal ( 14,000 l )
Housing material: high quality aluminum
Dimensions WxDxH, in (mm): 6 x 17 x 29 ( 405 x 425 x 740 )
Voltage: 18 VAC
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN1SS
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN1.2SS
Capacity is 0.6 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN3SS
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
Material: body - stainless steel, fogging insert - ruby
  • Chemically inert and low adhesion inner layer does not accumulate biofilms
  • Flexible and very elastic design simplifies installation, high resistance to mechanical damage
  • Large safety margin for maximum pressure
  • Small outer diameter for easy installation
Advantages:
Key Features:
Maximum operating pressure: 4000 psi ( 275 bar )
Burst pressure: 13800 psi ( 950 bar )
Conditional pass diameter: 5/32 in ( 4 mm )
Outer diameter: 9/32 in ( 7.2 mm )
Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
Inner layer: PTFE
Outer reinforcing layer: high quality stainless steel
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
Minimum bending radius: 1.6 in ( 40 mm )
  • Operates with both wired control panels and wireless control units in any combination
  • Provides power for wired control panels and nozzles
Advantages:
  • Provides nozzles' operating modes according to M12UV's mode
  • Allows cascading to increase the number of humidification zones
  • Allows to set the priority of the nozzles
  • Provides a link to BMS (alarm output)
  • Waterproof design
Multi-zone controller MZC10RF
Modern look
Key Features:
Number of separately controlled humidification zones: 10
Number of receiving board slots: 10
Voltage: 20...24 VDC
Supply voltage for the valves and control panels: 20...24 VDC
Power consumption (including connected nozzles), max.: 110 W
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 14 x 6 x 7.8 ( 360 x 150 x 200 )
Color: light gray, transparent cover
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Power supply (from MZC10RF's motherboard): 20...24 VDC
Housing material: special fiberglass
Dimensions WxH, in (mm): 1 x 2.8 ( 26 x 72 )
  • Wide signal range, including operation through reinforced concrete walls
  • Quick installation on MZC10RF's motherboard
  • Easy pairing with wireless control units
Advantages:
Receiving board RF Receiver
Optional for MZC10RF
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Active nozzle AN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Active nozzle AN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Silent operation
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Active nozzle AN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 20...24 VDC
Intermediate tube's length: 26 in
Key Features:
Chlorine capacity: 700,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Dimensions without bracket and fittings HxD, in (mm): 27 x 8 ( 680 x 200 )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
  • Quick change of the filter element
Advantages:
External ultra-carbon filter UCF700
Required for S18UV
Key Features:
Chlorine capacity: 900,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
Advantages:
External ultra-carbon filter UCF900
Required for S18UV
ENG
FR
Introduction
Our products
System
Pricelist
Company
Contacts
Main
Price-list
Price - list
PG6UV
Central module PG6UV
11 170.00 EUR
SAN1L
Active nozzle SAN1L
660.00 EUR
Boson BL
Main zone control unit Boson BL
480.00 EUR
SM1
Softener module SM1
1 300.00 EUR
HS2W
Color touch control panel HS2
1060.00 EUR
PN1SS
Passive nozzle PN1SS
340.00 EUR
DPM6 NEW
Deep purification module DPM6 NEW
1 460.00 EUR
HPH04-PTFE STEEL THERMO
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
20.00 EUR
Boson-C
Control unit Boson-C
480.00 EUR
SAN3
Active nozzle SAN3
640.00 EUR
HS1
Control panel HS1
420.00 EUR
MCF75
External micro-carbon filter MCF75
420.00 EUR
AN1L
Active nozzle AN1L
420.00 EUR
MZC10RF
Multi-zone controller MZC10RF
1 790.00 EUR
Shadow BL
Additional zone control unit Shadow BL
450.00 EUR
AС.F06
Tee DN04-DN04-DN04
25.00 EUR
HS2B
Color touch control panel HS2
1060.00 EUR
DPM Blue
Ultradeep purification module DPM Blue
5 550.00 EUR
PN3SS
Passive nozzle PN3SS
350.00 EUR
MHS1
Maximum humidistat MHS1
160.00 EUR
FS1
Filter installation set FS1
590.00 EUR
M12UV
Central module M12UV
10 730.00 EUR
Shadow
Additional zone control unit Shadow
450.00 EUR
AС.F01
Fitting DN04
25.00 EUR
AN3
Active nozzle AN3
390.00 EUR
DPM12 NEW
Deep purification module DPM12 NEW
1 750.00 EUR
AС.F15
Ferrule DN04 SS
9.00 EUR
RF Receiver
Receiving board RF Receiver
290.00 EUR
UCF700
External ultra-carbon filter UCF700
1 170.00 EUR
SAN1.2
Active nozzle SAN1.2
980.00 EUR
Boson Receiver
One-zone wireless controller Boson Receiver
390.00 EUR
Boson-C BL
Control unit Boson-C BL
480.00 EUR
MF2
Additional microfilter MF2
200.00 EUR
PN1.2SS
Passive nozzle PN1.2SS
490.00 EUR
Boson
Main zone control unit Boson
480.00 EUR
PG12UV
Central module PG12UV
11 540.00 EUR
AN1.2
Active nozzle AN1.2
730.00 EUR
MCF170
External micro-carbon filter MCF170
480.00 EUR
AN1
Active nozzle AN1
410.00 EUR
SAN1
Active nozzle SAN1
650.00 EUR
S18UV
Central module S18UV
20 090.00 EUR
UCF900
External ultra-carbon filter UCF900
1 270.00 EUR