Central module PG6UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 200 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
CENTRAL MODULE PG12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 2
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 230 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module M12UV
With the patented technology of double pass through the reverse osmosis membrane.
Key Features:
Rated capacity: 3.2 GPH (12 LPH)
Maximum capacity: 4.4 GPH ( 17 LPH )
Number of separately controlled humidification zones: 1
Voltage: 24 VDC + 48 VDC
Output pressure: 1000 psi ( 70 bar )
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Power consumption: 180 W
  • Internal hydraulic valves - no source of noise in the room
  • Completely automatic operation
Housing and inner mechanical parts material: high quality aluminum
  • High degree of demineralization - 97...99%
  • Microbiological safety - eliminates viruses, bacteria, fungi
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
Advantages:
  • Continuous UV water sterilization
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Central module S18UV
With 2-stage reverse osmosis and SEPAMED pump
Key Features:
Rated capacity: 4.8 GPH (18 LPH)
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Voltage: 230 VDC
Output pressure: 500...1200 psi ( 35...82 bar )
  • The lowest noise-level operation, the device is acceptable to be mounted near living areas
  • Two-stage reverse osmosis, the deepest purification level is achieved
Power consumption: 600 W
  • Service interval increased up to 2-3 years
  • Regular hydraulic testing of high pressure line
Housing and inner mechanical parts material: high quality aluminum
  • Operation enabled whether with active or passive nozzles
  • Continuous extensive UV sterilization in the vessel
Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )
  • Pressure setting in the range of 500...1200 psi
  • Touch control panel
Advantages:
  • Microbiological safety - the system totally removes viruses, bacteria and fungus
  • Completely automatic operation
  • Leakage control inside the case and on high pressure line
The equipment is produced in branded aluminum cases with an original design. All rights reserved.
Control panel HS2W
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
  • Sensor display of high resolution
  • Electronic scheme maintains required relative humidity with high accuracy
Supply voltage: 20...24 VDC
Color of face plate: white (HS2W)
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS2B
With touchscreen
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...55%
Housing material: glass and high gloss plastic
Accuracy of RH regulation: ± 3% ( 20...55% range )
Supply voltage: 20...24 VDC
  • Sensor display of high resolution
Color of face plate: black (HS2B)
  • Electronic scheme maintains required relative humidity with high accuracy
  • Modern design, possible color selection
  • Ability to set operation schedule of humidification for the exact room
Dimensions WxH, in (mm): 3.2 x 3.2 ( 80 x 80 )
Advantages:
Control panel HS1
Modern look
Key Features:
Number of separately controlled zones of humidification: 1
Control range of RH: 5...95%
Housing material: high-quality matted plastic
Accuracy of RH regulation: ± 3% ( 20...90% range )
Supply voltage: 20...24 VDC
  • Electronic circuit maintains the required relative humidity with high accuracy
Color of face plate: white, RAL 9010
  • LCD display for control of the set and current relative humidity
  • On-wall installation
  • Modern look
Dimensions WxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Advantages:
Maximum humidistat MHS1
Modern look
Key Features:
Protection threshold setting: 25...95%, preinstalled on 60%
Protection threshold accuracy: ± 5%
Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )
Housing material: high-quality matted plastic
Color: white, RAL 9010
  • Mechanical design, requiring no power
  • On-wall installation
  • Modern look
Advantages:
Main zone control unit Boson
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Main zone control unit Boson BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • High RF signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Accumulator life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: white
Weight: 0.3 lb (130 g)
Additional zone control unit Shadow BL
Touch screen
Key Features:
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3%
Accumulator life (without recharge): 6...7 months
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
  • Wide signal range, including operation through reinforced concrete walls
Charger connector type: micro-USB
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Housing material: high-quality plastic
Advantages:
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
  • Fast wall mounting
Color: black
Weight: 0.3 lb (130 g)
Control unit Boson-C
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: white
  • Fast wall mounting
Control unit Boson-C bl
Touch screen
Key Features:
Control range of RH: 5...55%
Accuracy of RH regulation: ± 2%
Accumulator life (without recharge): Mounting: magnetic
Supply voltage: 24 VDC
Display: 3", monochrome
Housing material: high-quality plastic
  • High measurement accuracy
  • Battery life up to half-year without recharge
  • Touch screen
Dimensions WxDxH, in (mm): 2.8 x 0.7 x 3.2 ( 72 x 18 x 82 )
Advantages:
Color: black
  • Fast wall mounting
One-zone wireless controller Boson Receiver
Modern look
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Dimensions (without cable glands) WxDxH, in (mm): 4.5 x 2.2 x 3.5 ( 115 x 55 x 90 )
Line-of-sight wireless range: up to 3000 ft
Power supply: 230 VAC
  • Wide signal range, including operation through reinforced concrete walls
  • Easy pairing with wireless control units
Advantages:
External micro-carbon filter MCF75
For PG6UV
Key Features:
Chlorine capacity: 20,000 gal ( 75,000 l )
Micro-carbon filter class: 5 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 12 x 4.5 ( 300 x 115 )
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
Softener module SM1
For middle hardness water
Key Features:
Maximum clean water capacity: 9.6 GPH ( 36 LPH )
Salt capacity: 55 lb ( 25 kg )
Power consumption: 6 W
Inlet pressure: 30...90 psi ( 2...6 bar )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Inner tank material: fiberglass
  • Automatic regeneration (requires periodic salt refilling)
Housing material: high-quality plastic
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
Connection: G 1/2" ( 1/2" BSPP )
  • Operation ready connector for output to PG12UV
Advantages:
  • Equipped with an electronic control module
  • Fully automatic operation
  • Cabinet construction - no extra salt tank
  • For water hardness over 250 ppm
Filter installation set FS1
Required for SM1, optional instead of MCF170
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings height x diameter, in (mm): 12 x 4.5 ( 300 х 115 )
  • Microfiltration function
  • Very high capacity for chlorine
Dimensions of micro-carbon filter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
  • Easy replacement of filter elements
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Advantages:
  • Pressure gauge allows to monitor filters' condition
External micro-carbon filter MCF170
Necessary if NOT using FS1
Key Features:
Chlorine capacity: 45,000 gal ( 170,000 l )
Micro-carbon filter class: 10 μm
Dimensions without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element
Advantages:
Additional microfilter MF2
Optional in case of high level of water contaminants
Key Features:
Microfilter class: 1 μm
Dimensions of microfilter without bracket and fittings, height x diameter, in (mm): 22 x 4.5 ( 560 x 115 )
Connections: inlet JG 3/8", outlet JG 3/8"
  • Microfiltration function
  • Easy replacement of filter element
  • Removes suspended particles
Advantages:
Deep purification module DPM6 NEW
Optional for PG6UV
Key Features:
Rated capacity: 1.6 GPH ( 6 LPH )
Maximum capacity: 2.4 GPH ( 9 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,300 gal ( 12,500 l )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 22 x 7 x 18 ( 570 x 170 x 460 )
Deep purification module DPM12 NEW
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 2 μS/cm
Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 12,500 l )
  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity
Advantages:
Housing material: special fiberglass
Dimensions WxDxH, in (mm): 24 x 9 x 22 ( 620 x 220 x 550 )
Ultradeep purification module DPM Blue
Optional for PG12UV
Key Features:
Rated capacity: 3.2 GPH ( 12 LPH )
Maximum capacity: 4.4 GPH ( 17 LPH )
Maximum treated water purity: 0.1 μS/cm
Capacity (with the incoming water is 25 μS/cm): 3,700 gal ( 14,000 l )
  • Highest degree of purification - up to 0.1 μS/cm
  • Silent operation, the device is suitable for mounting near living areas
  • Built-in purity water analyzer, inlet and outlet
  • Removing air bubbles
Housing material: high quality aluminum
  • Visual monitoring of ion exchange resin
Dimensions WxDxH, in (mm): 6 x 17 x 29 ( 405 x 425 x 740 )
  • Completely automatic operation
Voltage: 18 VAC
Advantages:
  • Leakage control
  • Easy CO2 cylinder replacement
  • High ion exchange resin and CO2 cylinder capacity
Passive nozzle PN1SS
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN1.2SS
Capacity is 0.6 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Passive nozzle PN3SS
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
  • Chemically inert and low adhesion inner layer does not accumulate biofilms
Minimum bending radius: 1.6 in ( 40 mm )
  • Flexible and very elastic design simplifies installation, high resistance to mechanical damage
Key Features:
  • Large safety margin for maximum pressure
Maximum operating pressure: 4000 psi ( 275 bar )
Burst pressure: 13800 psi ( 950 bar )
  • Small outer diameter for easy installation
Conditional pass diameter: 5/32 in ( 4 mm )
Outer diameter: 9/32 in ( 7.2 mm )
Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
Advantages:
Inner layer: PTFE
Outer reinforcing layer: high quality stainless steel
Multi-zone controller MZC10RF
Modern look
Key Features:
Number of separately controlled humidification zones: 10
Number of receiving board slots: 10
Voltage: 20...24 VDC
Supply voltage for the valves and control panels: 20...24 VDC
Power consumption (including connected nozzles), max.: 110 W
  • Operates with both wired control panels and wireless control units in any combination
Housing material: high-quality plastic
Dimensions WxDxH, in (mm): 14 x 6 x 7.8 ( 360 x 150 x 200 )
  • Provides power for wired control panels and nozzles
Color: light gray, transparent cover
Advantages:
  • Provides nozzles' operating modes according to M12UV's mode
  • Allows cascading to increase the number of humidification zones
  • Allows to set the priority of the nozzles
  • Provides a link to BMS (alarm output)
  • Waterproof design
Receiving board RF Receiver
Optional for MZC10RF
Key Features:
Maximum number of paired Boson and Shadow control units: 16
Frequency range: 315 MHz
Line-of-sight wireless range: up to 3000 ft
Power supply (from MZC10RF's motherboard): 20...24 VDC
  • Wide signal range, including operation through reinforced concrete walls
  • Quick installation on MZC10RF's motherboard
  • Easy pairing with wireless control units
Advantages:
Housing material: special fiberglass
Dimensions WxH, in (mm): 1 x 2.8 ( 26 x 72 )
Active nozzle AN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle AN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
  • Silent operation
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Material: body - stainless steel, fogging insert - ruby
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
Active nozzle SAN1
Capacity is 0.3 GPH
Key Features:
Capacity: 0.3 GPH ( 1.2 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
Material: body - stainless steel, fogging insert - ruby
Control voltage: 18...24 VDC
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN1.2
Capacity is 0.6 GPH
Key Features:
Capacity: 0.6 GPH ( 2.4 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 85 μm
Droplet size: 10...30 μm
Fogging head size, diameter x length, in (mm): 0.55 x 1.42 ( 14 x 36 )
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
Material: body - stainless steel, fogging insert - ruby
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 18...24 VDC
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Active nozzle SAN3
Capacity is 0.9 GPH
Key Features:
Capacity: 0.9 GPH ( 3.5 LPH )
Built-in stainless steel filter 40 μm
Anti-drip valve
Atomizing orifice diameter: 200 μm
Droplet size: 15...40 μm
Fogging head size, diameter x length, in (mm): 0.5 x 1.2 ( 12 x 30 )
  • Absolutely silent electromagnetic high-pressure TWINCOIL valve
  • Anti-drip valve
  • High capacity filter
Material: body - stainless steel, fogging insert - ruby
  • Long life thanks to ruby insert
Advantages:
  • Less visible installation due to the built-in construction
Control voltage: 20...24 VDC
  • Entirely flow-through construction, no stagnant zones
  • Fogging head's silent operation
Intermediate tube's length: 26 in
External ultra-carbon filter UCF700
Required for S18UV
Key Features:
Chlorine capacity: 700,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Dimensions without bracket and fittings HxD, in (mm): 27 x 8 ( 680 x 200 )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
  • Quick change of the filter element
Advantages:
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
External ultra-carbon filter UCF900
Required for S18UV
Key Features:
Chlorine capacity: 900,000 l (200,000 gal)
Ultrafiltration class: 0.1 μm
Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
  • Ultrafiltration barrier traps bacteria and colloids
  • Very high capacity for chlorine
Advantages:
ENG
FR
Introduction
Our products
System
Pricelist
Company
Contacts
Superior
Main
Products
Superior
With 2-stage reverse osmosis and SEPAMED pump
Rated capacity: 4.8 GPH ( 18 LPH )
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Output pressure: 500...1200 psi
Central module
Filters
Controllers
Nozzle
Pipeline
CENTRAL MODULE
Central module S18UV
With 2-stage reverse osmosis and SEPAMED pump
MORE INFO
Rated capacity: 4.8 GPH ( 18 LPH )
Maximum capacity: 6.4 GPH ( 24 LPH )
Number of separately controlled humidification zones: 1
Output pressure: 500...1200 psi ( 35...82 bar )
controllers
Control panel HS2W
Maximum humidistat MHS1
Number of separately controlled zones of humidification: 1
Protection threshold setting: 25...95%, preinstalled on 60%
MORE INFO
MORE INFO
Control panel HS2B
Main zone control unit Boson
Control range of RH: 5...55%
Protection threshold accuracy: ± 5%
Number of separately controlled zones of humidification: 1
Control range of RH: 5...60%
Accuracy of RH regulation: ± 3% ( 20...55% range )
MORE INFO
MORE INFO
Control range of RH: 5...55%
Line-of-sight wireless range: up to 3000 ft
Accuracy of RH regulation: ± 3% ( 20...55% range )
Accumulator life (without recharge): 6...7 months
Control panel HS1
Main zone control unit Boson BL
Number of separately controlled zones of humidification: 1
Control range of RH: 5...60%
Sensor display of high resolution
MORE INFO
MORE INFO
Control range of RH: 5...95%
Line-of-sight wireless range: up to 3000 ft
Optional for HS1
Sensor display of high resolution
Accuracy of RH regulation: ± 3% ( 20...90% range )
Accumulator life (without recharge): 6...7 months
Touch screen
Modern look
Touch screen
Accuracy of RH regulation: ± 5%
Accuracy of RH regulation: ± 5%
One-zone wireless controller Boson Receiver
Maximum number of paired Boson and Shadow control units: 16
MORE INFO
Additional zone control unit Shadow
Line-of-sight wireless range: up to 3000 ft
Control range of RH: 5...60%
MORE INFO
Line-of-sight wireless range: up to 3000 ft
Accumulator life (without recharge): 6...7 months
Additional zone control unit Shadow BL
Control range of RH: 5...60%
MORE INFO
Line-of-sight wireless range: up to 3000 ft
For PG6UV, PG12UV
Accumulator life (without recharge): 6...7 months
Touch screen
Touch screen
Accuracy of RH regulation: ± 5%
Accuracy of RH regulation: ± 3%
Power supply: 230 VAC
Receiving board RF Receiver
Maximum number of paired Boson and Shadow control units: 16
MORE INFO
Line-of-sight wireless range: up to 3000 ft
Multi-zone controller MZC10RF
Number of receiving board slots: 10
MORE INFO
Supply voltage for the valves and control panels: 20...24 VDC
for MZC10RF
For M12UV
Power consumption: 110 VAC
Power supply: 20...24 VDC
Control unit Boson-C BL
Control range of RH: 5...55%
MORE INFO
Supply voltage: 24 VDC
Display: 3", monochrome
Touch screen
Accuracy of RH regulation: ± 2%
Control unit Boson-C
Control range of RH: 5...55%
MORE INFO
Supply voltage: 24 VDC
Display: 3", monochrome
Écran tactile
Accuracy of RH regulation: ± 2%
FILTERS
Softener module SM1
Maximum clean water capacity: 9.6 GPH ( 36 LPH )
MORE INFO
Inlet pressure: 30...90 psi ( 2...6 bar )
Accumulator life (without recharge): 6...7 months
For middle hardness water
Salt capacity: 55 lb ( 25 kg )
External ultra-carbon filter UCF700
Ultradeep purification module DPM Blue
Chlorine capacity: 700,000 l (200,000 gal)
Rated capacity: 3.2 GPH ( 12 LPH )
MORE INFO
MORE INFO
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Maximum treated water purity: 0.1 μS/cm
Required for S18UV
Optional for PG12UV
Ultrafiltration class: 0.1 μm
Maximum capacity: 4.4 GPH ( 17 LPH )
External ultra-carbon filter UCF900
Chlorine capacity: 900,000 l (240,000 gal)
MORE INFO
Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8"
Required for S18UV
Ultrafiltration class: 0.1 μm
Capacity (with the incoming water is 25 μS/cm): 3,700 gal ( 14,000 l )
Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
Nozzle
Active nozzle SAN1
Capacity: 0.3 GPH ( 1.2 LPH )
MORE INFO
Atomizing orifice diameter (each head): 85 μm
Droplet size: 10...30 μm
Capacity is 0.3 GPH
Built-in stainless steel filter 40 μm
Key Features:
Active nozzle SAN1.2
Active nozzle SAN3
Capacity: 0.6 GPH ( 2.4 LPH )
Capacity: 0.9 GPH ( 3.5 LPH )
MORE INFO
MORE INFO
Atomizing orifice diameter: 85 μm
Atomizing orifice diameter (each head): 200 μm
Droplet size: 10...30 μm
Droplet size: 10...40 μm
Capacity is 0.6 GPH
Capacity is 0.9 GPH
Built-in stainless steel filter 40 μm
Built-in stainless steel filter 40 μm
Key Features:
Key Features:
Pipeline
Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m
AC.F01 - DN04 fitting for connection of HPH04-PTFE STEEL THERMO reinforced high-pressure hose
AC.F15 - ferrule for crimping of HPH04-PTFE STEEL THERMO reinforced high-pressure hose
AC.F06 - DN04-DN04-DN04 tee for connection of HPH04-PTFE STEEL THERMO reinforced high-pressure hose
Maximum operating pressure: 4000 psi ( 275 bar )
Dimensions ODxD, in (mm):0.6 x 1.6 ( 16*41 mm )
Dimensions ODxD, in (mm):0.4 x 0.8 ( 10x20 mm )
Dimensions, in (mm): 1.6 x 1.1 x 0.5 ( 40x27x12 mm )
MORE INFO
Conditional pass diameter: 5/32 in ( 4 mm )
Connection: DKOL
Connection: CEL
Burst pressure: 13800 psi ( 950 bar )
Material: stainless steel
Material: stainless steel
Material: stainless steel
Thread: female
Thread: male